POWER SEAT SWITCH (for TMMR Made Front Side with Seat Position Memory System) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY


    1. Install the position control ECU and switch assembly to the front seat cushion shield LH with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Connect the connector to the front lumbar power seat switch.

    2. Connect the 2 connectors to the position control ECU and switch assembly.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield LH.

  3. INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD LH


    1. B000J1I

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield LH as shown in the illustration.

    2. B000I12

      Engage the 2 claws to install the front No. 1 seat inner cushion shield LH to the clip as shown in the illustration.

    3. Install the screw.

  4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the rubber band of the separate type front seatback cover.

  5. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the reclining power seat switch knob.

  6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  7. INSTALL FRONT SEAT ASSEMBLY LH

    Click here