POWER SEAT SWITCH (for TMMK Made) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT POWER SEAT SWITCH


    1. Install the front power seat switch to a new front seat cushion shield with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD


    1. for Driver Side:


      1. Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.

    2. Connect the front power seat switch connector.

    3. Engage the wire harness clamp.

    4. Engage the 2 claws to install the front seat cushion shield.

    5. Install the screw.

      Torque:
      0.6 N*m  { 6 kgf*cm, 5 in.*lbf }

  3. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the 2 rubber bands of the separate type front seatback cover.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the reclining power seat switch knob.

  5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here