POWER SEAT SWITCH (for TMMK Made) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B000LTR

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B000MVZ

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000L7Q

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD


    1. B000K8N

      Remove the screw.

    2. Disengage the 2 claws to remove the front seat cushion shield.

    3. B000N2H

      Disengage the wire harness clamp.

    4. Disconnect the front power seat switch connector.

    5. for Driver Side:


      1. B000HER

        Disengage 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  6. REMOVE FRONT POWER SEAT SWITCH


    1. B000IFH

      Remove the 3 screws and front power seat switch from the front seat cushion shield.