SEAT MEMORY SWITCH (for TMMR Made) INSPECTION


  1. INSPECT SEAT MEMORY SWITCH


    1. B000NA5E01
      Text in Illustration
      *1 M1 Switch
      *2 M2 Switch
      *3 SET Switch
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 1 SET switch is pressed Below 1 Ω
      4 - 1 M1 switch is pressed Below 1 Ω
      3 - 1 M2 switch is pressed Below 1 Ω
      2 - 1 SET switch is not pressed 10 kΩ or higher
      4 - 1 M1 switch is not pressed 10 kΩ or higher
      3 - 1 M2 switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.