REAR SEAT ASSEMBLY (for TMC, TMMR Made Fold Down Seat Type) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt assembly from the rear seat center shoulder belt guide.

    2. Fold down the rear seatback assembly LH.

    3. B000ML8E01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    4. w/o Seat Heater System:


      1. B000LMV

        Remove the 2 bolts and rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

    5. w/ Seat Heater System:


      1. B000LMV

        Remove the 2 bolts and disconnect the rear seatback assembly LH.

      2. B000I3I

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

  3. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold down the rear seatback assembly RH.

    2. B000N8GE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    3. w/o Seat Heater System:


      1. B000J3W

        Remove the 2 bolts and rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

    4. w/ Seat Heater System:


      1. B000J3W

        Remove the 2 bolts and disconnect the rear seatback assembly RH.

      2. B000H9I

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. B000IRWE01

      Lift up the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the 2 rear seat cushion lock hooks.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Be sure to hold the part of the rear seat cushion assembly directly next to the rear seat cushion lock hooks when lifting it up. Lifting a different part of the rear seat cushion assembly may deform the rear seat cushion frame.

    2. w/ Seat Heater System:


      1. Disconnect the connector.

      2. B000KQW

        Disengage the 2 clamps.

    3. Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly and remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  5. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. B000LZB

      Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  6. REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide LH.

    2. B000HI6

      Remove the bolt.

    3. Disengage the hook and remove the rear side seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE REAR SIDE SEATBACK ASSEMBLY RH


    1. Disconnect the rear seat outer belt assembly from the rear seat shoulder belt guide RH.

    2. B000K82

      Remove the bolt.

    3. Disengage the hook and remove the rear side seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.