REAR SEAT ASSEMBLY (for TMMK Made Fold Down Seat Type) REASSEMBLY


  1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH


    1. B000MXG

      Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

  2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH


    1. B000MCX

      Engage the 20 claws to install the rear seatback frame sub-assembly LH to the separate type rear seatback cover with pad LH.

  3. INSTALL REAR SEATBACK CARPET LH


    1. B000KM9E02
      Text in Illustration
      *a Fastener

      Engage the 2 fasteners.

    2. Install the rear seatback carpet LH with the 3 clips.

  4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE


    1. B000LPR

      Engage the guide.

    2. Install the rear seat center shoulder belt guide with the 2 screws.

  5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH


    1. B000JPV

      Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 10 new hog rings.

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

  6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH


    1. B000J3U

      Engage the 20 claws to install the rear seatback frame sub-assembly RH to the separate type rear seatback cover with pad RH.

  7. INSTALL REAR SEATBACK CARPET RH


    1. B000I19E02
      Text in Illustration
      *a Fastener

      Engage the 3 fasteners.

    2. Install the rear seatback carpet RH with the 5 clips.

  8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    1. B000ICD

      Engage the guide.

    2. Install the rear seat center armrest assembly with the bolt and washer.

  9. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH


    1. B000HNF

      Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.

  10. INSTALL REAR SEAT AIRBAG ASSEMBLY LH

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the rear side seatback frame sub-assembly is not deformed. If it is, replace it with a new one.


    1. Install the rear seat airbag assembly to the rear side seatback frame sub-assembly with 2 new nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Engage the clamp to connect the airbag wire harness.

    3. Engage the 8 hooks to install the rear side seatback cover with pad.

  11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH


    1. B000NCI

      Engage the guide.

    2. Install the rear seat shoulder belt guide LH with the 2 screws.

  12. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. INSTALL BENCH TYPE REAR SEAT CUSHION COVER


    1. Engage the 4 fasteners.

    2. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 12 new hog rings.

      B000GZCE02
      Text in Illustration
      *a Fastener - -

      Note


      • Be careful not to damage the cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

  16. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY


    1. Engage the 13 hooks to install the rear seat cushion frame sub-assembly.

      B000JP4