FRONT SEAT ASSEMBLY (for TMC, TMMR Made Power Seat) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. B000JMF

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B000LTR

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B000MVZ

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000HL3

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. B000KCL

      Remove the screw.

    2. Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.

    3. B000KY8

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

    4. B000JOU

      Using a clip remover, remove the clip.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. B000M7P

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. B000J8VE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. B000K56

      Disconnect the front lumbar power seat switch connector.

  7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. B000JIW

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. B000JHCE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  8. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)


    1. B000KWB

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  9. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)


    1. B000HRR

      Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield LH.

  10. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. B000MIE

      Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. B000KSR

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  12. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. B000KDK

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. B000H13

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly.

  14. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. B000KTS

      Remove the nut and front seat inner belt assembly.

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B000HO6

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. B000NIE

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. B000LLI

        Disconnect the connector.

      2. Disengage the clamp.

      3. B000MFT

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. B000LSN

      Disengage the hook.

    5. B000J0N

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B000IM8

      Remove the 2 hog rings.

    2. B000IY9

      Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. B000JKM

      Remove the 5 hog rings.

    2. B000L7J

      Remove the 3 hog rings.

    3. B000JML

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. B000KQO

      Remove the nut and the 2 brackets.

    6. B000HM6

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  18. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. B000MD2

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B000J4G

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. B000KN2

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  21. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. B000MMR

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  22. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. B000GXZ

      Disengage the 2 guides to remove the reclining adjuster inside cover LH.

  23. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. B000IV8

      Disengage the 2 guides to remove the reclining adjuster inside cover RH.

  24. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. B000HPW

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  25. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. B000MGI

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. B000JD9

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. B000H42

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  28. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. B000JM8

      Disconnect the connector.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  29. REMOVE FRONT SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.

  30. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.

  31. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. B000J23

      Remove the 4 bolts

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.