LUMBAR SWITCH (for TMC, TMMR Made) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System)


    1. B000LTR

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System)


    1. B000MVZ

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B000HL3

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. B000KCL

      Remove the screw.

    2. Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.

    3. B000KY8

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

  6. REMOVE FRONT SEAT CUSHION SHIELD


    1. B000M7P

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. B000J8VE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. B000K56

      Disconnect the front lumbar power seat switch connector.

  7. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)


    1. B000HRR

      Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield LH.

  8. REMOVE FRONT LUMBAR POWER SEAT SWITCH


    1. B000MIE

      Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.