LUMBAR SWITCH (for TMMK Made) INSPECTION


  1. INSPECT LUMBAR FRONT POWER SEAT SWITCH

    B000KJRE08
    Text in Illustration
    *1 Hold Switch
    *2 Release Switch
    *a

    Component without harness connected

    (Lumbar Front Power Seat Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Hold Below 1 Ω
      1 - 2
      3 - 2 Off
      1 - 2
      3 - 2 Release
      1 - 5

      If the result is not as specified, replace the lumbar front power seat switch.