POWER SEAT SWITCH (for TMC, TMMR Made Front Side without Seat Position Memory System) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT POWER SEAT SWITCH


    1. Install the front power seat switch to the front seat cushion shield with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  3. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  4. INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. B000J1I

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    2. B000I12

      Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.

    3. Install the screw.

  5. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the rubber band of the separate type front seatback cover.

  6. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the reclining power seat switch knob.

  7. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  8. INSTALL FRONT SEAT ASSEMBLY

    Click here