SIDE AIRBAG SENSOR (for Rear Side) ON-VEHICLE INSPECTION

INSPECT SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

1. Perform a diagnostic system check.

   for TMMK Made: Click here

   for TMC, TMMR Made: Click here

INSPECT SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

1. Perform a diagnostic system check.

   for TMMK Made: Click here

   for TMC, TMMR Made: Click here

2. Visually check the side airbag sensor assemblies for defects if a center pillar of the vehicle or the area around a center pillar is damaged.

   Tech Tips

   The defects are as follows:

   
   

   • Cracks on the sensor housing

   • Dents on the sensor housing

   • Chips on the sensor housing

   • Cracks or other damage to the connector

   • Damage to the serial number

   OK
   No defects are found.

   If any of the defects is found, replace the side airbag sensor assembly with a new one.

INSPECT SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)

1. When airbags have deployed as the result of a collision, be sure to replace all side airbag sensor assemblies in the damaged areas (anywhere in need of repair).

2. Visually check the side airbag sensor assemblies in undamaged areas for defects.

   Tech Tips

   The defects are as follows:

   
   

   • Cracks on the sensor housing

   • Dents on the sensor housing

   • Chips on the sensor housing

   • Cracks or other damage to the connector

   • Damage to the serial number

   OK
   No defects are found.

   If any of the defects is found or a side airbag sensor assembly has detected a major collision, replace the side airbag sensor assembly with a new one.