FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMC, TMMR Made) REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for Manual Seat: Click here

    for Power Seat: Click here

Tech Tips

Use the same procedure for the LH side and RH side.


  1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

    Click here

  3. DISCONNECT AIRBAG WIRE HARNESS (for Manual Seat)


    1. B000L03

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. B000KDD

      Disengage the fastener and separate the airbag wire harness.

    3. B000L41

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

    4. w/ Seat Heater System:


      1. B000LLI

        Disconnect the connector.

      2. Disengage the clamp.

  4. DISCONNECT AIRBAG WIRE HARNESS (for Power Seat)


    1. B000HL3

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. B000HO6

      Disengage the fastener and separate the airbag wire harness.

    3. B000NIE

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

    4. w/ Seat Heater System:


      1. B000LLI

        Disconnect the connector.

      2. Disengage the clamp.

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)


    1. B000JJ2

      Remove the 5 hog rings.

    2. B000MNB

      Remove the 3 hog rings.

    3. B000JML

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. B000JZV

      Remove the nut and the 2 brackets.

    6. B000HM6

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)


    1. B000JKM

      Remove the 5 hog rings.

    2. B000L7J

      Remove the 3 hog rings.

    3. B000JML

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. B000KQO

      Remove the nut and the 2 brackets.

    6. B000HM6

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  7. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. B000MD2

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.