FRONT SEAT SIDE AIRBAG ASSEMBLY (for TMMK Made) REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for Manual Seat: Click here

    for Power Seat: Click here

Tech Tips

Use the same procedure for the LH side and RH side.


  1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

    Click here

  3. DISCONNECT AIRBAG WIRE HARNESS (for Manual Seat)


    1. B000JES

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. B000I3L

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  4. DISCONNECT AIRBAG WIRE HARNESS (for Power Seat)


    1. B000L7Q

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. B000LDVE01

      Disconnect the connector (A).

    3. Disengage the clamp (B).

    4. Disengage the claw (D) and 3 clamps (C) to disconnect the airbag wire harness.

    5. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)


    1. B000KBO

      Disengage the hook.

    2. B000IJR

      Disengage the 2 fasteners.

    3. B000I0D

      Turn back the separate type front seatback cover.

    4. B000HH9

      Disengage the 2 hooks.

    5. B000KLC

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. B000JHF

      Remove the separate type front seatback cover with pad.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)


    1. B000L70

      Disengage the hook.

    2. B000HT4

      Disengage the 2 fasteners.

    3. B000JIM

      Turn back the separate type front seatback cover.

    4. B000HNP

      Disengage the 2 hooks.

    5. B000L5U

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. B000NMJ

      Remove the separate type front seatback cover with pad.

  7. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. B000HQU

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly is not deformed. If it is, replace it with a new one.