METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning.

      5. Select the setting by referring to the table below.

        Note


        • Record the current settings before customizing.

        Warning
        Tester Display Default Content Setting Relevant ECU
        Key Remind Sound Slow Function to change the frequency of the key reminder warning buzzer Fast, Normal, Slow Combination meter assembly
        Flasher Sound Volume Adjustment*1 Medium Function to change to flasher sound volume Large, Medium, Small Combination meter assembly
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing time OFF, 3, 4, 5, 6, 7 Combination meter assembly
        Display
        Tester Display Default Content Setting Relevant ECU
        ODO Display Time After IG OFF Setting*2 30s Function to change the odometer display time after the ignition switch is turned off OFF, 30s, 60s, 600s Combination meter assembly

        • *1: except TMMK Made

        • *2: for TMMK Made