INSIDE HANDLE LIGHT INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY (for Front Door)


    1. Engage the claw and 3 clamps, and install the front door inside handle illumination light assembly.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP (for Front Door)


    1. B000MP8

      Install the front door inner glass weatherstrip.

  3. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY (for Front Door)


    1. B000J2V

      Engage the 2 claws and guide, and install the front door inside handle sub-assembly to the front door trim board sub-assembly.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Door)


    1. B000KO6E01
      Text in Illustration
      *1 Front Door Inside Locking Cable Assembly
      *2 Front Door Lock Remote Control Cable Assembly

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    2. w/o Memory:


      1. Connect the connector.

    3. w/ Memory:


      1. Connect the 2 connectors.

    4. B000KHDE01
      Text in Illustration
      *1 Reference Boss

      Engage the front door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

    5. B000NJZ

      Engage the 10 clips and install the front door trim board sub-assembly.

    6. Install the 3 screws.

    7. If protective tape has been applied, remove it.

  5. INSTALL COURTESY LIGHT ASSEMBLY (for Front Door)


    1. Connect the connector.

    2. B000I67E01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  6. INSTALL FRONT ARMREST ASSEMBLY (for Front Door)


    1. B000LDC

      Engage the 2 guides, 3 clips and 7 claws, and install the front armrest assembly.

  7. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Door)

    for Driver Side: Click here

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Door)

    for Front Passenger Side: Click here

  9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (for Front Door)


    1. B000LAY

      Engage the 3 clips to install the front door lower frame bracket garnish.

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (for Front Door)


    1. B000HXN

      Engage the 3 claws to install the front door inside handle bezel plug.

  11. INSTALL REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY (for Rear Door)


    1. Engage the claw and 3 clamps, and install the rear door inside handle illumination light assembly.

  12. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP (for Rear Door)


    1. B000K30

      Install the rear door inner glass weatherstrip.

  13. INSTALL REAR DOOR INSIDE HANDLE SUB-ASSEMBLY (for Rear Door)


    1. B000J2V

      Engage the guide and 2 claws to install the rear door inside handle sub-assembly to the rear door trim board sub-assembly.

  14. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY (for Rear Door)


    1. B000H70

      Install the No. 1 door scuff plate clamp as shown in the illustration.

    2. B000K11E01
      Text in Illustration
      *1 Rear Door Inside Locking Cable Assembly
      *2 Rear Door Lock Remote Control Cable Assembly

      Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. Connect the connector.

    4. B000J14E01
      Text in Illustration
      *1 Reference Boss

      Engage the rear door trim board sub-assembly with the 4 claws and reference boss as shown in the illustration.

    5. B000I2D

      Engage the 8 clips and install the rear door trim board sub-assembly.

    6. Install the 3 screws.

    7. If protective tape has been applied, remove it.

  15. INSTALL REAR ARMREST ASSEMBLY (for Rear Door)


    1. B000KAY

      Engage the 2 guides, 3 clips and 7 claws to install the rear armrest assembly.

  16. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL (for Rear Door)


    1. w/o Seat Heater System:


      1. Connect the connector.

    2. w/ Seat Heater System:


      1. Connect the 2 connectors.

    3. B000H23

      Engage the 4 guides, 2 clips and 5 claws to install the rear power window regulator switch assembly with rear door armrest base panel.

  17. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG (for Rear Door)


    1. B000K01

      Engage the 3 claws to install the rear door inside handle bezel plug.