IGNITION KEY CYLINDER LIGHT REMOVAL


  1. REMOVE LOWER STEERING COLUMN COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the parts to break.


    1. Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

    2. Lock the tilt and telescopic lever.

    3. B000N1S

      Turn the steering wheel assembly to the left and remove the screw.

    4. B000MYU

      Turn the steering wheel assembly to the right and remove the screw.

    5. B000J6W

      Push the right and left sides of the lower steering column cover to disengage the 2 claws.

    6. B000I5Z

      Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the 2 claws.

      Tech Tips

      Spread the claws to disengage them.

  2. REMOVE TRANSPONDER KEY COIL


    1. B000IEI

      Disengage the 2 claws and disconnect the transponder key coil.

    2. B000KYY

      Disconnect the connector to remove the transponder key coil.