PRECAUTION FOR DISCONNECTING THE BATTERY CABLE
Note
When disconnecting the battery negative (-) cable, initialize the following system(s) after the cable is reconnected:
| System | See Procedure |
|---|---|
| Parking Assist Monitor System |
IGNITION SWITCH EXPRESSIONS
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | Start |
PRECAUTIONS WHEN USING INTELLIGENT TESTER
When using the intelligent tester with the ignition switch off to troubleshoot:
Connect the intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.