ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for TMC, TMMR Made)

    for LHD: Click here

    for RHD: Click here

  2. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for TMMK Made)


    1. B000IN7

      Apply MP grease to the sliding areas of the hood lock assembly.

    2. Connect the hood lock control cable assembly.

    3. Install the hood lock assembly with the 2 bolts and hood lock bolt.

      Torque:
      Bolt
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
      Hood Lock Bolt
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    4. w/ Engine Hood Courtesy Switch:


      1. Connect the connector.

    5. Install a new hood lock nut cap.

  3. INSTALL FRONT BUMPER ASSEMBLY (for TMC, TMMR Made)

    Click here

  4. INSTALL COOL AIR INTAKE DUCT SEAL (for TMMK Made)


    1. Install the cool air intake duct seal with the 9 clips.

  5. ADJUST HOOD SUB-ASSEMBLY (for TMC, TMMR Made)

    Click here

  6. ADJUST HOOD SUB-ASSEMBLY (for TMMK Made)

    Click here