| B2271 |
Ignition Hold Monitor Malfunction |
IG ON |
Click here
|
| B2274 |
ACC Monitor Malfunction |
Wait 10 seconds after turning the engine switch on (ACC) or on (IG), and then wait another 10 seconds after turning the engine switch off. |
Click here
|
| B2277 |
Detecting Vehicle Submersion |
Wait 300 seconds after connecting the cable to the negative (-) battery terminal. |
Click here
|
| B2282 |
Vehicle Speed Signal Malfunction |
Drive the vehicle for 20 seconds at a vehicle speed of 25 km/h (16 mph) or more, and then drive the vehicle at a vehicle speed of less than 5 km/h (3 mph) for 20 seconds. |
Click here
|
| B2283 |
Vehicle Speed Sensor Malfunction |
Run the engine at an engine speed of 2000 rpm or more for 330 seconds. |
Click here
|
| B2284 |
Brake Signal Malfunction |
Connect the cable to the negative (-) battery terminal, release the brake pedal and wait 20 seconds or more. Then depress the brake pedal for 20 seconds or more. |
Click here
|
| B2285 |
Steering Lock Position Signal Circuit Malfunction |
Disconnect the cable from the negative (-) battery terminal, wait 30 seconds and then reconnect the cable to the negative (-) battery terminal. Wait 40 seconds or more with the engine switch off (with the steering wheel locked), then turn the engine switch on (ACC) (with the steering unlocked) and wait 40 seconds or more. |
Click here
|
| B2286 |
Runnable Signal Malfunction |
Disconnect the cable from the negative (-) battery terminal, wait 30 seconds and reconnect the cable to the negative (-) battery terminal. Wait 20 seconds or more with the engine switch off, then start the engine and maintain an engine speed of 1000 rpm or more for 20 seconds or more. |
Click here
|
| P0335 |
Crankshaft Position Sensor Circuit Malfunction (NE Signal) |
Allow the engine to idle for 10 seconds or more. |
Click here
|
| U0100 |
Lost Communication with ECM / PCM |
Turn the engine switch on (IG) and wait 10 seconds or more. |
Click here
|
| U0140 |
Lost Communication with Main Body ECU |
Always |
Click here
|
| U0142 |
Lost Communication with Main Body ECU |
Always |
Click here
|
| U0155 |
Lost Communication with Combination Meter |
Turn the engine switch on (IG) and wait 10 seconds or more. |
Click here
|