DOOR CONTROL TRANSMITTER (w/ Smart Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. B000KJ9

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. B000HBL

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. B000L89

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.

    2. for Type B:


      1. B000I94

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. B000H0B

        Engage the 2 claws and install the cover.

      3. B000HBL

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. B000L89

        Insert the mechanical key into the transmitter.

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.

    3. for Type C:


      1. B000LOO

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter from being damaged.

      2. B000HCJ

        Install the transmitter housing cover by pressing down on it as shown in the illustration

      3. B000MD9

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.