PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Parking Assist Monitor System |
PRECAUTION FOR KEY REMINDER WARNING SYSTEM
For the inspection procedure of the key reminder warning system for models equipped with the smart entry and start system, refer to the smart entry and start system Click here.
PRECAUTIONS WHEN USING INTELLIGENT TESTER
When using the intelligent tester with the ignition switch off to troubleshoot:
Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.
After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.