BLIND SPOT MONITOR SENSOR REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH

    Note

    Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.


    1. B000MGA

      Disengage the 2 clamps.

    2. B000K9E

      Remove the 3 nuts.

    3. B000JY7

      Disconnect the connector to remove the blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH

    Note

    Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.


    1. B000J7C

      Disengage the clamp.

    2. B000JYY

      Remove the 3 nuts.

    3. B000MQP

      Disconnect the connector to remove the blind spot monitor sensor RH.

  4. REMOVE BLIND SPOT MONITOR COVER LH


    1. B000J1R

      Remove the 2 nuts.

    2. Disengage the claw to remove the blind spot monitor cover LH.

  5. REMOVE BLIND SPOT MONITOR COVER RH

    Tech Tips

    Use the same procedure as for the LH side.