ULTRASONIC SENSOR (for Front Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. B000HQAE01
      Text in Illustration
      *a Cutout
      *b Protrusion

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper assembly with the protrusion when installing the No. 1 ultrasonic sensor retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the No. 1 ultrasonic sensor retainer and surface of the front bumper assembly.

      Tech Tips


      • When installing the retainer, align the cutout and protrusion as shown in the illustration.

      • This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the front bumper assembly when there is a gap between the No. 1 ultrasonic sensor retainer and the front bumper assembly surface. In this case, do not push on the No. 1 ultrasonic sensor.

    2. Connect the connector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here