REAR VIEW MONITOR SYSTEM DIAGNOSIS SYSTEM


  1. DESCRIPTION


    1. Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the rear view monitor system seems to be malfunctioning, use the GTS to check for malfunctions and to perform repairs.

  2. CHECK DLC3


    1. Check the DLC3 Click here.

  3. VEHICLE SIGNAL CHECK


    1. Check the item displayed for "REV" on the "Vehicle Signal Check Mode" screen.


      • for Navigation System (for Navigation Receiver Type): Click here.

      • for Audio and Visual System (for Radio and Display Type): Click here.

  4. CAMERA SYNCHRONOUS ERROR HISTORY

    Tech Tips

    This function is used to check the date and time of occurrence when a camera synchronous error occurs.


    1. Check camera synchronous error history.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Navigation System / Utility / Camera Synchronous Error History.

      5. When an item is stored for Camera Synchronous Error History, record it before repairing the navigation receiver assembly*1 or radio and display receiver assembly*2, and television camera assembly.


        • *1: for Navigation System (for Navigation Receiver Type)

        • *2: for Audio and Visual System (for Radio and Display Type)

        Tech Tips

        Camera Synchronous Error History can store up to 5 history data items. If a new camera synchronous error occurs when 5 data items have already been stored, the oldest data is cleared and the new data is stored.

    2. Clear camera synchronous error history.


      1. When DTCs are cleared using any of the following operations, Camera Synchronous Error History will be cleared as well.


        • for Navigation System (for Navigation Receiver Type): Click here.

        • for Audio and Visual System (for Radio and Display Type): Click here.


        • Cleared using the GTS.

        • Cleared using the system check mode screen.

        • Cleared using the unit check mode screen.

  5. VIDEO DEVICE CONNECTION CHECK

    for Navigation System (for Navigation Receiver Type): Click here.

    for Audio and Visual System (for Radio and Display Type): Click here.