NAVIGATION RECEIVER (for TMMK Made) REMOVAL


  1. PRECAUTION

    Click here

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    1. B000NK9

      Disengage the 4 clips and remove the upper console box sub-assembly.

    2. w/ Seat Heater System:


      1. Disconnect each connector.

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. B000JA9

      Disengage the 2 claws as shown in the illustration.

    2. B000NQD

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  5. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. B000MQT

      Disconnect the connector.

    3. Remove the 2 screws <C> or <D>.

    4. B000MVY

      Disengage the 6 clips and remove the rear console upper panel sub-assembly.

  6. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. B000IYK

      Using a moulding remover, disengage the 11 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 1 speaker opening cover assembly.

  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. B000IBG

      Remove the 2 screws <C> or <D>.

    2. B000IK8

      Disengage the 2 clips and guide as shown in the illustration.

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  8. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. B000IZQE01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. B000M8B

      Remove the 4 bolts and 2 screws.

    3. B000LKD

      Pull the navigation receiver assembly with air conditioning control assembly toward the rear of the vehicle to disengage the 4 clips.

    4. Disconnect each connector and remove the navigation receiver assembly with air conditioning control assembly.

  9. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. B000K3F

      Remove the 5 screws and No. 1 radio receiver bracket.

  10. REMOVE NO. 2 RADIO RECEIVER BRACKET


    1. B000H41

      Remove the 5 screws and No. 2 radio receiver bracket.

  11. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. B000H4V

      Disengage the 2 clips to remove the air conditioning control assembly.

  12. REMOVE NAVIGATION RECEIVER ASSEMBLY