FRONT DOOR SPEAKER (for TMMK Made) INSTALLATION

Note


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the speaker cone.


    1. Engage the 2 claws to the vehicle body to temporarily install the front No. 1 speaker assembly.

    2. B000HKVE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Install the front No. 1 speaker assembly with the 4 screws.

      Tech Tips

      Install the screws in the order shown in the illustration.

    3. Connect the connector.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. B000LHW

      Install the front door inner glass weatherstrip.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. B000MJLE01
      Text in Illustration
      *1 Front Door Inside Locking Cable Assembly
      *2 Front Door Lock Remote Control Cable Assembly

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly as shown in the illustration.

    2. Engage the clamp.

    3. B000J6LE01
      Text in Illustration
      *a Reference Boss

      Engage the 4 claws and reference boss as shown in the illustration.

    4. B000LET

      Engage the 10 clips to install the front door trim board sub-assembly.

    5. Install the 3 screws.

  4. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. B000I67E01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  5. INSTALL FRONT ARMREST ASSEMBLY


    1. B000LDC

      Engage the 2 guides, 3 clips and 7 claws to install the front armrest assembly.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. Connect each connector.

    2. B000IU5

      Engage the 3 guides, 2 clips and 6 claws to install the power window regulator master switch assembly with front door armrest base panel.

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. Connect each connector.

    2. B000N5Y

      Engage the 3 guides, 2 clips and 6 claws to install the power window regulator switch assembly with front door armrest base panel.

  8. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER


    1. B000JC8

      Engage the 2 guides and 2 claws to install the front door front lower frame upper cover.

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. B000JK0

      Engage the 3 claws to install the front door inside handle bezel plug.