AUDIO AND VISUAL SYSTEM (for Radio and Display Type) Data Signal Circuit between Radio Receiver and Stereo Jack Adapter

DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.

WIRING DIAGRAM


  1. for LHD (w/ Wireless Charger System)

    B000HR5E71

  2. for LHD (w/o Wireless Charger System)

    B000HR5E72

  3. for RHD

    B000HR5E73

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)


    1. Disconnect the I156 radio and display receiver assembly connector. (w/o Display Signal Line)

    2. Disconnect the I205 radio and display receiver assembly connector. (w/ Display Signal Line)

    3. Disconnect the I146 No. 1 stereo jack adapter assembly connector. (for RHD without Display Signal Line)

    4. Disconnect the I204 No. 1 stereo jack adapter assembly connector. (for RHD with Display Signal Line), (for LHD without Wireless Charger System)

    5. Disconnect the I207 No. 1 stereo jack adapter assembly connector. (for LHD with Wireless Charger System)

    6. B000NLTE35
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Radio and Display Receiver Assembly)
      *b

      Front view of wire harness connector

      (to No. 1 Stereo Jack Adapter Assembly)

      Measure the resistance according to the value(s) in the table below. (for RHD with Display Signal Line), (for LHD without Wireless Charger System)

      Standard Resistance
      Tester Connection Condition Specified Condition
      I205-2 (UDO-) - I204-2 (UDO-) Always Below 1 Ω
      I205-3 (UDO+) - I204-3 (UDO+) Always Below 1 Ω
      I205-5 (USG1) - I204-5 (UJSS) Always Below 1 Ω
      I205-2 (UDO-) - Body ground Always 10 kΩ or higher
      I205-3 (UDO+) - Body ground Always 10 kΩ or higher
      I205-5 (USG1) - Body ground Always 10 kΩ or higher
    7. B000NLTE33
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Radio and Display Receiver Assembly)
      *b

      Front view of wire harness connector

      (to No. 1 Stereo Jack Adapter Assembly)

      Measure the resistance according to the value(s) in the table below. (for LHD with Wireless Charger System)

      Standard Resistance
      Tester Connection Condition Specified Condition
      I205-2 (UDO-) - I207-2 (UDO-) Always Below 1 Ω
      I205-3 (UDO+) - I207-3 (UDO+) Always Below 1 Ω
      I205-5 (USG1) - I207-5 (UJSS) Always Below 1 Ω
      I205-2 (UDO-) - Body ground Always 10 kΩ or higher
      I205-3 (UDO+) - Body ground Always 10 kΩ or higher
      I205-5 (USG1) - Body ground Always 10 kΩ or higher
    8. B000IPKE43
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Radio and Display Receiver Assembly)
      *b

      Front view of wire harness connector

      (to No. 1 Stereo Jack Adapter Assembly)

      Measure the resistance according to the value(s) in the table below. (for RHD without Display Signal Line)

      Standard Resistance
      Tester Connection Condition Specified Condition
      I156-2 (US1-) - I146-2 (UDO-) Always Below 1 Ω
      I156-3 (US1+) - I146-3 (UDO+) Always Below 1 Ω
      I156-5 (USG1) - I146-5 (UJSS) Always Below 1 Ω
      I156-2 (US1-) - Body ground Always 10 kΩ or higher
      I156-3 (US1+) - Body ground Always 10 kΩ or higher
      I156-5 (USG1) - Body ground Always 10 kΩ or higher
    9. B000NLTE34
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Radio and Display Receiver Assembly)
      *b

      Front view of wire harness connector

      (to No. 1 Stereo Jack Adapter Assembly)

      Measure the resistance according to the value(s) in the table below. (for LHD without Wireless Charger System)

      Standard Resistance
      Tester Connection Condition Specified Condition
      I156-2 (UDO-) - I204-2 (UDO-) Always Below 1 Ω
      I156-3 (UDO+) - I204-3 (UDO+) Always Below 1 Ω
      I156-5 (USG1) - I204-5 (UJSS) Always Below 1 Ω
      I156-2 (UDO-) - Body ground Always 10 kΩ or higher
      I156-3 (UDO+) - Body ground Always 10 kΩ or higher
      I156-5 (USG1) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here