TILT AND TELESCOPIC MANUAL SWITCH REMOVAL


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. B000J5KE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable sub-assembly.

    4. B000LVWE01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE LOWER STEERING COLUMN COVER


    1. B000KMX

      Remove the 3 screws.

    2. B000LCT

      Push the right and left sides of the lower steering column cover, and disengage the 2 claws to remove the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

  5. REMOVE TILT AND TELESCOPIC SWITCH


    1. B000J17

      Disconnect the connector.

    2. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.