MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Driver Side Knee Airbag)


    1. B000N47

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (w/o Driver Side Knee Airbag)


    1. B000MCM

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (w/o Driver Side Knee Airbag)


    1. B000HXQ

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH (w/o Driver Side Knee Airbag)


    1. B000HH8

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. B000MY7

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (w/o Driver Side Knee Airbag)


    1. B000H4N

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  6. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)


    1. B000MW9

      Remove the 2 bolts <B>.

    2. w/o Driver Side Knee Airbag:


      1. B000KQ0

        Disengage the 5 clips and 3 guides to remove the instrument panel sub-assembly.

    3. w/ Driver Side Knee Airbag:


      1. B000KAO

        Disengage the 4 claws, 7 clips and 3 guides to remove the instrument panel sub-assembly.

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

  8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. B000L3B

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. Disengage the wire harness clamp.

    3. B000H2Y

      Disengage the claw to remove the multiplex tilt and telescopic ECU from the steering column assembly.