POWER STEERING ECU REMOVAL


  1. REMOVE STEERING COLUMN ASSEMBLY

    Click here

  2. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY (w/o Smart Entry and Start System)


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in each tapered-head bolt.

    3. B000HPF

      Using a screw extractor, remove each tapered-head bolt, and then remove the steering column upper with switch bracket assembly from the steering column assembly.

  3. REMOVE STEERING LOCK ACTUATOR ASSEMBLY (w/ Smart Entry and Start System)


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in each tapered-head bolt.

    3. for Manual Tilt and Manual Telescopic Steering Column


      1. B000KP7

        Using a screw extractor, remove each tapered-head bolt, and then remove the steering lock actuator assembly from the steering column assembly.

    4. for Power Tilt and Power Telescopic Steering Column


      1. B000LJV

        Using a screw extractor, remove each tapered-head bolt, and then remove the steering lock actuator assembly from the steering column assembly.

  4. REMOVE POWER STEERING ECU PROTECTOR


    1. B000J5F

      Remove the power steering ECU protector from the power steering ECU with motor assembly.

  5. DISCONNECT ECU WIRE SUB-ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)


    1. B000IZ4

      Disconnect the 2 connectors from the power steering ECU with motor assembly.

  6. REMOVE POWER STEERING ECU WITH MOTOR ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)


    1. B000H5EE01
      Text in Illustration
      *1 Aluminum Plate
      *2 Wooden Block

      Secure the steering column assembly in a vise using aluminum plates and wooden block as shown in the illustration.

      Note


      • Do not overtighten the vise, as the steering column assembly may become deformed.

      • Secure the power steering motor assembly so that it is directly upright.

      • Support the steering column assembly with a wooden block or similar item to ensure that it does not fall.

    2. B000LLV

      Disconnect the connector from the power steering ECU with motor assembly.

    3. B000MX7

      Remove the 3 bolts and power steering ECU with motor assembly from the electric power steering column sub-assembly.

    4. B000K00

      Remove the electric power steering motor shaft spacer from the electric power steering column sub-assembly.

    5. B000KPQ

      Remove the electric power steering motor shaft damper from the electric power steering column sub-assembly.

  7. DISCONNECT ECU WIRE SUB-ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)


    1. B000N6A

      Disconnect the 2 connectors from the power steering ECU with motor assembly.

  8. REMOVE POWER STEERING ECU WITH MOTOR ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)


    1. B000IWP

      Disconnect the connector from the power steering ECU with motor assembly.

    2. B000JPJ

      Remove the 3 bolts and power steering ECU with motor assembly from the electric power steering column sub-assembly.

    3. B000HC4

      Remove the electric power steering motor shaft spacer from the electric power steering column sub-assembly.

    4. B000K1H

      Remove the electric power steering motor shaft damper from the electric power steering column sub-assembly.