PARKING BRAKE CABLE (for TMC, TMMR Made) INSTALLATION

INSTALL NO. 2 PARKING BRAKE CABLE CLAMP
1. Install the No. 2 parking brake cable clamp to the No. 3 parking brake cable assembly.
INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
1. Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
  
  Torque:
  
  Bolt (A)
  
  8.5 N*m { 87 kgf*cm, 75 in.*lbf }
  
  Bolt (B) and Nut
  
  6.0 N*m { 61 kgf*cm, 53 in.*lbf }
2. Install the No. 3 parking brake cable assembly with the 2 bolts.
  
  Torque:
  
  8.0 N*m { 82 kgf*cm, 71 in.*lbf }
3. Install the clip to the No. 3 parking brake cable assembly.
INSTALL NO. 2 FLOOR UNDER COVER (for LH Side)
1. for TMC Made:
  1. Install the No. 2 floor under cover with the 6 nuts.
    
    Tech Tips
    
    The 6 nuts are attached to the No. 2 floor under cover.
    
    Torque:
    
    4.0 N*m { 41 kgf*cm, 35 in.*lbf }
  2. Install the screw and 2 clips.
2. for TMMR Made:
  1. Install the No. 2 floor under cover with the 6 nuts.
    
    Tech Tips
    
    The 6 nuts are attached to the No. 2 floor under cover.
    
    Torque:
    
    4.0 N*m { 41 kgf*cm, 35 in.*lbf }
  2. Install the 2 clips.
INSTALL NO. 1 FLOOR UNDER COVER (for RH Side)
1. for TMC Made:
  1. Install the No. 1 floor under cover with the 5 nuts and 2 clips.
    
    Tech Tips
    
    The 5 nuts and 2 clips are attached to the No. 1 floor under cover.
    
    Torque:
    
    Nut
    
    4.0 N*m { 41 kgf*cm, 35 in.*lbf }
  2. Install the screw.
2. for TMMR Made:
  1. Install the No. 1 floor under cover with the 5 nuts and 2 clips.
    
    Tech Tips
    
    The 5 nuts and 2 clips are attached to the No. 1 floor under cover.
    
    Torque:
    
    Nut
    
    4.0 N*m { 41 kgf*cm, 35 in.*lbf }
CONNECT PARKING BRAKE SHOE LEVER

Click here
INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR
1. for 2AR-FE, 6AR-FSE:
  1. Install the front No. 2 floor heat insulator with the 3 nuts.
    
    Torque:
    
    4.9 N*m { 50 kgf*cm, 43 in.*lbf }
INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 2AR-FE)

Click here
INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) (for 6AR-FSE)

Click here

INSTALL NO. 4 PARKING BRAKE CABLE ASSEMBLY

Text in Illustration
*1	No. 4 Parking Brake Cable Assembly
*2	Rubber Boot
*3	Parking Brake Equalizer

Install the No. 4 parking brake cable assembly to the parking brake equalizer.

Slide the parking brake equalizer and rubber boot as shown in the illustration.

Note

Make sure that the rubber boot is securely inserted into the groove of the No. 4 parking brake cable assembly.

Text in Illustration
*1	Parking Brake Equalizer
*2	No. 2 Parking Brake Cable Assembly
*3	No. 3 Parking Brake Cable Assembly
*4	No. 4 Parking Brake Cable Assembly

Connect the No. 3 parking brake cable assembly to the parking brake equalizer.

Connect the No. 2 parking brake cable assembly to the parking brake equalizer.

INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)
1. Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
2. Install the clip to the No. 1 parking brake cable assembly.
3. Temporarily install the adjusting nut.
4. Bend the parking brake pedal claw.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)
1. Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
2. Install the clip to the No. 1 parking brake cable assembly.
3. Temporarily install the adjusting nut.
4. Bend the parking brake pedal claw.
INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

Click here
INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

Click here