PARKING BRAKE CABLE (for TMC, TMMR Made) REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Click here

  2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Click here

  3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. B000M0D

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. B000LNT

      Remove the adjusting nut.

    3. B000HSC

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. B000HVD

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. B000KDQ

      Remove the adjusting nut.

    3. B000N8J

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  5. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. B000H2DE01
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. B000KD0E01
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for 2AR-FE)

    Click here

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) (for 6AR-FSE)

    Click here

  8. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. for 2AR-FE, 6AR-FSE:


      1. B000KI2

        Remove the 3 nuts and front No. 2 floor heat insulator.

  9. SEPARATE PARKING BRAKE SHOE LEVER

    Click here

  10. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)


    1. for TMC Made:


      1. B000NFB

        Remove the screw and 2 clips.

        Text in Illustration
        B000K70 Nut (attached to under cover)
        B000IB9 Screw

      2. Disengage the 6 nuts and remove the No. 2 floor under cover.

        Tech Tips

        The 6 nuts will remain attached to the No. 2 floor under cover.

    2. for TMMR Made:


      1. B000LMW

        Remove the 2 clips.

        Text in Illustration
        B000K70 Nut (attached to under cover)

      2. Disengage the 6 nuts and remove the No. 2 floor under cover.

        Tech Tips

        The 6 nuts will remain attached to the No. 2 floor under cover.

  11. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)


    1. for TMC Made:


      1. B000KKM

        Remove the screw.

        Text in Illustration
        B000K70 Nut (attached to under cover)
        B000IB9 Screw

      2. Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.

        Tech Tips

        Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.

    2. for TMMR Made:


      1. B000I0H

        Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.

        Text in Illustration
        B000K70 Nut (attached to under cover)

        Tech Tips

        Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.

  12. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. B000KB0

      Remove the clip from the No. 3 parking brake cable assembly.

    2. B000HSN

      Remove the 2 bolts and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      B000ICN

  13. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.