PARKING BRAKE CABLE (for TMMK Made) REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

    Click here

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. B000M0D

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. B000LNT

      Remove the adjusting nut.

    3. B000HSC

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  3. REMOVE REAR DOOR SCUFF PLATE LH


    1. B000H06E01

      Disengage the claw (A) in the direction indicated by the arrow (1) shown in the illustration.

    2. Disengage the claw (B) in the direction indicated by the arrow (2) shown in the illustration.

    3. Disengage the 4 claws (C) to remove the rear door scuff plate LH.

      Tech Tips

      Disengage the claws from the front side of the rear door scuff plate LH.

  4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Disconnect the rear door opening trim weatherstrip LH.

  5. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)


    1. B000K92

      Disengage the 3 claws and remove the lap belt outer anchor cover.

  6. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. B000IQ2

      Remove the bolt and disconnect the floor anchor of the front seat outer belt assembly.

  7. REMOVE CENTER PILLAR LOWER GARNISH LH


    1. B000NG5

      Disengage the 2 claws and 3 clips, and remove the center pillar lower garnish LH.

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  11. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH


    1. B000IQ2

      Remove the bolt and disconnect the floor anchor of the front seat outer belt assembly.

  12. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  14. REMOVE FRONT SEAT ASSEMBLY RH


    1. for Power Seat:

      Tech Tips

      Use the same procedure as for the LH side Click here.

    2. for Manual Seat: Click here

  15. REMOVE AUDIO AMPLIFIER COVER (for 10 Speakers)


    1. B000LCR

      Using a clip remover, remove the 2 clips and audio amplifier cover.

  16. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET (for 10 Speakers)


    1. B000MRV

      Remove the bolt and disconnect the ground wire.

    2. Disconnect each connector and disengage the clamp.

    3. B000JK5

      Remove the bolt.

    4. Disengage the 2 guides and remove the stereo component amplifier assembly with bracket.

  17. REMOVE FLOOR CARPET HOOK


    1. B000LIPE02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 guides.

    2. B000KNME02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 claws and remove the 6 floor carpet hooks.

  18. REMOVE NO. 4 CROSS MEMBER FLOOR REINFORCEMENT SUB-ASSEMBLY


    1. B000HPS

      Remove the screw.

    2. B000NNN

      Disengage the guide to disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. Turn back the floor carpet to a position where the No. 4 cross member floor reinforcement sub-assembly can be removed.

    4. B000J87

      Remove the 8 bolts and No. 4 cross member floor reinforcement sub-assembly.

  19. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. B000K06E01
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. B000HYEE01
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  20. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  21. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. B000KI2

      Remove the 3 nuts and front No. 2 floor heat insulator.

  22. REMOVE PARKING BRAKE SHOE LEVER

    Click here

  23. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)


    1. B000LIZ

      Remove the 2 bolts, screw and 2 clips.

      Text in Illustration
      B000K70 Bolt
      B000IB9 Screw
      B000JQI Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  24. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)


    1. B000KYG

      Remove the 2 bolts and screw.

      Text in Illustration
      B000K70 Bolt
      B000IB9 Screw
      B000JQI Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  25. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. B000K52

      Remove the clip from the No. 3 parking brake cable assembly.

    2. B000L3S

      Remove the bolt and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      B000L1I

  26. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp.