FRONT BRAKE DISASSEMBLY


  1. REMOVE CYLINDER BOOT (for TMC, TMMR Made)


    1. B000KUOE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the front disc brake piston set ring and cylinder boot from the disc brake cylinder assembly.

      Note

      Be careful not to damage the front disc brake piston or front disc brake cylinder.

  2. REMOVE FRONT DISC BRAKE PISTON


    1. Place a piece of cloth between the front disc brake piston and front disc brake cylinder.

    2. B000LS3

      Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the front disc brake piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  3. REMOVE CYLINDER BOOT (for TMMK Made)


    1. B000NLBE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the front disc brake cylinder.

      Note

      Be careful not to damage the front disc brake cylinder.

  4. REMOVE PISTON SEAL


    1. B000H04E02
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the front disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the front disc brake cylinder.

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  6. REMOVE FRONT DISC BRAKE BLEEDER PLUG