BRAKE MASTER CYLINDER (for LHD) DISASSEMBLY


  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  2. REMOVE BRAKE FLUID INFORMATION LABEL (for TMMK Made)

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

  4. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. B000L0N

      Using a pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

      Note

      Do not drop the brake master cylinder reservoir sub-assembly.

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder assembly.

  6. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir sub-assembly.