BRAKE PEDAL (for RHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Tech Tips

    Use the same procedure for LHD and RHD Click here.

  2. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. B000ISB

      Disconnect the connector.

    2. B000H2H

      Turn the stop light switch assembly counterclockwise and remove it.

  3. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  4. REMOVE PUSH ROD PIN


    1. B000JK4

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  5. REMOVE BRAKE PEDAL RETURN SPRING


    1. B000NH4

      Remove the brake pedal return spring from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. B000L43

      Disconnect the brake pedal load sensing switch connector.

    2. B000L11

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. B000LUN

      Remove the 4 nuts and brake pedal support assembly.