BRAKE PEDAL (for LHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    for TMC, TMMR Made: Click here

    for TMMK Made: Click here

  2. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)


    1. B000NP2E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt.

    4. Disengage the 2 guides and remove the headlight leveling ECU assembly.

  3. REMOVE AFS ECU (w/ AFS)


    1. B000NP2E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt.

    4. Disengage the 2 guides and remove the AFS ECU.

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. B000ISB

      Disconnect the connector.

    2. B000H2H

      Turn the stop light switch assembly counterclockwise and remove it.

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  6. REMOVE PUSH ROD PIN


    1. B000JX2

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL RETURN SPRING


    1. B000I3M

      Remove the brake pedal return spring from the brake pedal support assembly.

  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. B000N5B

      Disconnect the brake pedal load sensing switch connector and disengage the clamp.

    2. B000HT7

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. B000KXP

      Remove the 4 nuts and brake pedal support assembly.