VSC OFF SWITCH (for TMMK Made) REMOVAL


  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B000KDO

      Disconnect the front door opening trim weatherstrip LH.

  2. REMOVE INSTRUMENT SIDE PANEL LH


    1. B000H81

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. B000IQ4

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. B000HO0

      Disengage the 3 clips to remove the No. 1 instrument cluster finish panel garnish as shown in the illustration.

  4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B000M8R

      Apply protective tape to the area shown in the illustration.

      Text in Illustration
      B000JL5 Protective Tape
    2. B000HAB

      Disengage the 2 clips as shown in the illustration.

    3. B000HMM

      Using a moulding remover, disengage the 2 clips to remove the No. 1 instrument panel register assembly.

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. Operate the tilt and telescopic lever to fully extend and lower the steering column assembly.

    2. B000L6J

      Using a moulding remover, disengage the 2 claws, 4 clips and 2 guides.

    3. B000NP0

      Disengage the 5 claws, 5 clips and 2 guides.

    4. Disconnect each connector.

    5. B000I7Y

      Remove the instrument cluster finish panel assembly as shown in the illustration.

  6. REMOVE VSC OFF SWITCH


    1. B000L2B

      Disengage the 2 claws and remove the VSC OFF switch from the instrument cluster finish panel assembly.