VACUUM WARNING SWITCH REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. w/ Windshield Deicer System:


      1. B000HLG

        Disengage the 2 clamps.

      2. Disconnect the connector and separate the wire harness from the front outer cowl top panel sub-assembly.

    2. w/ Heated Windshield Defroster System:


      1. B000HSG

        Disengage the 4 clamps.

      2. Disconnect the 2 connectors and separate the wire harness from the front outer cowl top panel sub-assembly.

    3. B000KY4

      Disengage the 2 clamps and separate the wire harness from the front outer cowl top panel sub-assembly.

    4. B000KRD

      Remove the 10 bolts and front outer cowl top panel sub-assembly.

  3. REMOVE VACUUM WARNING SWITCH ASSEMBLY


    1. B000LOR

      Disconnect the engine wire connector from the vacuum warning switch assembly.

    2. B000JKG

      Remove the vacuum warning switch assembly from the brake booster assembly.

  4. REMOVE CHECK VALVE GROMMET


    1. Remove the check valve grommet from the brake booster assembly.