VACUUM PUMP ON-VEHICLE INSPECTION


  1. DISCONNECT UNION TO CHECK VALVE HOSE


    1. B000KVV

      Slide the clip and disconnect the union to check valve hose from the vacuum pump assembly.

  2. OPERATION CHECK


    1. B000M4KE01
      Text in Illustration
      *a Vacuum Gauge

      Connect the hose of a vacuum gauge to the vacuum pump assembly.

    2. Start the engine and warm it up for more than 2 minutes.

    3. With the engine idling, measure the negative pressure of the vacuum pump assembly.

      Standard pressure
      Higher than 86.7 kPa (650 mmHg, 25.6 in.Hg)

      Tech Tips

      If the result is not as specified, replace the vacuum pump assembly.

    4. Remove the vacuum gauge from the vacuum pump assembly.

  3. CONNECT UNION TO CHECK VALVE HOSE


    1. Connect the union to check valve hose to the vacuum pump assembly, and slide the clip to secure it.