STEERING ANGLE SENSOR REMOVAL

Note

If both the spiral cable sub-assembly and the steering sensor are malfunctioning, replace them with a new spiral cable with sensor sub-assembly.


  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    for TMC, TMMR Made: Click here

    for TMMK Made: Click here

  2. REMOVE STEERING SENSOR


    1. B000J7G

      Disengage the 6 claws and 2 pins, and remove the steering sensor from the spiral cable sub-assembly.

      Note

      Do not damage the claws and pins of the spiral cable sub-assembly.