REAR BUMPER (for TMC, TMMR Made) DISASSEMBLY


  1. REMOVE REAR BUMPER PAD LH


    1. B000I77

      Remove the rear bumper pad LH.

      Text in Illustration
      B000JL5 Double-sided Tape

  2. REMOVE REAR BUMPER PAD RH


    1. B000MRG

      Remove the rear bumper pad RH.

      Text in Illustration
      B000JL5 Double-sided Tape

  3. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. B000MJC

      Remove the screw.

    2. Disengage the guide to remove the reflex reflector assembly LH.

  4. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all connectors.


    1. B000HVT

      Disengage the clamp.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. Disconnect the connector to remove the No. 2 luggage room wire.

  6. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all ultrasonic sensor clips.


    1. B000N8B

      Disengage the 4 claws to remove the ultrasonic sensor clip.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  7. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. B000HKQ

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. B000H8H

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  9. REMOVE LOWER REAR BUMPER COVER


    1. Remove the 8 outside moulding retainers.

      B000MKH

    2. Disengage the 8 guides to remove the lower rear bumper cover from the rear bumper cover.

  10. REMOVE REAR BUMPER SIDE RETAINER LH


    1. B000I1Q

      Remove the 3 screws.

    2. Disengage the 6 claws and remove the rear bumper side retainer LH.

  11. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  12. REMOVE WHEEL HOUSE REINFORCEMENT LH


    1. B000JFB

      Remove the screw and nut.

    2. Disengage the clip to remove the wheel house reinforcement LH.

  13. REMOVE WHEEL HOUSE REINFORCEMENT RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B000L3Y

      Remove the 6 nuts and rear bumper reinforcement sub-assembly.