REAR BUMPER (for TMC, TMMR Made) REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. B000KN5E01
      Text in Illustration
      *a Hook
      B000JL5 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. B000HMX

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      B000JL5 Protective Tape
    2. B000KK0

      Remove the 6 screws.

    3. Using a clip remover, remove the 4 clips.

    4. B000NI2

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. B000JE8

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. B000MXW

      Disengage the 6 claws as shown in the illustration.

    7. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    8. Remove the rear bumper assembly.