REAR BUMPER (for TMMK Made) REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. B000KY0E01
      Text in Illustration
      *a Hook
      B000JL5 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. B000I9I

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      B000JL5 Protective Tape
    2. B000I6R

      Remove the 2 screws.

    3. B000IU3

      Remove the 7 screws.

      Text in Illustration
      B000K70 Screw
      B000IB9 Clip

    4. Using a clip remover, remove the 4 clips.

    5. B000MNS

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. B000KCBE02
      Text in Illustration
      *a Screwdriver
      B000JL5 Protective Tape

      Disengage the claw (A).

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws (B) as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. B000M4B

      Disengage the 6 claws as shown in the illustration.

    9. Remove the rear bumper assembly.