ROCKER PANEL MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT ROCKER PANEL MOULDING END COVER


    1. B000H6Y

      Remove the 2 screws and front rocker panel moulding end cover.

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and door as shown in the illustration.

      B000LD0
      Text in Illustration
      B000JL5 Protective Tape - -
    2. B000NNU

      Remove the 2 screws and grommet.

    3. B000LXD

      Remove the screw.

    4. B000J49

      Using a clip remover, remove the 7 clips.

    5. B000H7V

      Remove the screw.

    6. B000M30

      Disengage the 10 clips and remove the rocker panel moulding.

    7. Remove the 10 clips from the rocker panel moulding.