HORN INSPECTION


  1. INSPECT HIGH PITCHED HORN ASSEMBLY (for TMC, TMMR Made)


    1. B000NLSE09
      Text in Illustration
      *a

      Component without harness connected

      (High Pitched Horn Assembly)
      *b Body ground

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal A4-1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY (for TMC, TMMR Made)


    1. B000NLSE10
      Text in Illustration
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)
      *b Body ground

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal A1-1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.

  3. INSPECT HIGH PITCHED HORN ASSEMBLY (for TMMK Made)


    1. B000HAWE01
      Text in Illustration
      *a

      Component without harness connected

      (High Pitched Horn Assembly)
      *b Body ground

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal A4-1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  4. INSPECT LOW PITCHED HORN ASSEMBLY (for TMMK Made)


    1. B000I51E01
      Text in Illustration
      *a

      Component without harness connected

      (Low Pitched Horn Assembly)
      *b Body ground

      Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal A1-1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.