FRONT BUMPER (for TMC, TMMR Made) DISASSEMBLY


  1. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. B000HN5

      Extend the headlight washer actuator sub-assembly.

    2. Disengage the claw to remove the headlight washer nozzle sub-assembly.

  2. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. B000N4W

      Disconnect the headlight cleaner hose.

    2. B000LH7

      Remove the headlight cleaner clamp as shown in the illustration.

    3. B000MXK

      Pull the headlight cleaner actuator clamp as shown in the illustration.

    4. While pushing the tab indicated by the arrow (A), disengage the claw and guide to remove the headlight washer actuator sub-assembly as shown in the illustration.

      B000HIPE01

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. B000NMV

      Disengage the 8 clamps to remove the headlight cleaner hose.

  6. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. B000HCY

      Disconnect the connector.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. B000L1B

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. B000MUL

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  8. REMOVE FOG LIGHT ASSEMBLY LH

  9. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE NO. 4 ENGINE ROOM WIRE (w/o TOYOTA Parking Assist-sensor System)


    1. B000M2A

      Disengage the clamp to remove the No. 4 engine room wire.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  11. REMOVE NO. 4 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. B000NFO

      Disengage the clamp to remove the No. 4 engine room wire.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  12. REMOVE FRONT FENDER LINER RETAINER


    1. B000N89

      Disengage the claw to remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  13. REMOVE NO. 2 RADIATOR GRILLE BRACKET


    1. B000LMD

      Remove the 2 screws.

    2. Disengage the guide to remove the No. 2 radiator grille bracket.

  14. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. B000JCY

      Remove the 2 clips.

    2. Disengage the 8 claws and remove the radiator grille sub-assembly.

  15. REMOVE UPPER RADIATOR GRILLE MOULDING LH


    1. B000J6Y

      Remove the screw.

    2. Disengage the 3 claws and remove the upper radiator grille moulding LH.

  16. REMOVE UPPER RADIATOR GRILLE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  17. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. B000NF8

      Remove the 2 screws.

    2. Disengage the 4 claws and 2 guides to remove the radiator grille emblem assembly with radiator grille emblem base.

    3. B000MQY

      Disengage the 3 claws and guide to remove the radiator grille emblem assembly from the radiator grille emblem base.

  18. REMOVE RADIATOR GRILLE BRACKET


    1. B000IYW

      Remove the clip.

    2. Disengage the guide to remove the radiator grille bracket.

  19. REMOVE FRONT BUMPER HOLE COVER LH


    1. B000JEM

      Disengage the 6 claws to remove the front bumper hole cover LH.

  20. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  21. REMOVE LOWER FRONT BUMPER COVER


    1. B000NMQE01
      Text in Illustration
      *a Hook

      Disengage the 4 claws.

    2. Disengage the hook and remove the lower front bumper cover.

  22. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. Remove the 4 screws.

      B000KG6

    2. Disengage the 24 claws and remove the lower radiator grille sub-assembly from the front bumper cover.

      B000KXM

  23. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. B000JI6

      Disengage the 2 guides to remove the front bumper energy absorber.

  24. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B000LUE

      Disengage the 5 clamps.

    2. Remove the 6 bolts and front bumper reinforcement sub-assembly.

  25. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. B000J95

      Remove the bolt and screw.

    2. Disengage the 2 claws and remove the front bumper side retainer LH.

  26. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.