HAZARD WARNING SWITCH (for TMC, TMMR Made) INSPECTION


  1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY (HAZARD SWITCH)


    1. B000MVUE10
      Text in Illustration
      *a

      Component without harness connected

      (Air Conditioning Control Assembly (Hazard Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (HAZ) - 6 (GND) Hazard switch off 10 kΩ or higher
      Hazard switch on Below 1 Ω

      If the result is not as specified, replace the heater control switch board.