HEADLIGHT DIMMER SWITCH (for TMC, TMMR Made) REMOVAL


  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B000H6HE02

      Disconnect each connector.

    2. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      If the claw is pulled with excessive force, it may break.

  3. REMOVE TILT AND TELESCOPIC SWITCH (for Power Tilt and Power Telescopic Steering Column)


    1. B000J17

      Disconnect the connector.

    2. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.

  4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B000NKQ

      Disconnect the connector.

    2. Using a screwdriver, disengage the 3 claws and remove the headlight dimmer switch assembly.