HEADLIGHT DIMMER SWITCH (for TMMK Made) INSPECTION


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B000IP8E56
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Dimmer Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Light Control Switch
      Tester Connection Condition Specified Condition
      15 (EL) - 18 (T)

      Light control switch off

      (DRL OFF position)

      		 10 kΩ or higher
      18 (T) - 20 (A)

      Light control switch off

      (DRL OFF position)

      		 10 kΩ or higher
      20 (A) - 19 (H)

      Light control switch off

      (DRL OFF position)

      		 10 kΩ or higher
      15 (EL) - 18 (T) Light control switch in tail position Below 1 Ω
      15 (EL) - 18 (T) Light control switch in head position Below 1 Ω
      18 (T) - 19 (H) Light control switch in head position Below 1 Ω
      15 (EL) - 20 (A) Light control switch in AUTO position Below 1 Ω
      Dimmer Switch
      Tester Connection Condition Specified Condition
      14 (HU) - 15 (EL) Dimmer switch in low position 10 kΩ or higher
      14 (HU) - 15 (EL) Dimmer switch in high position Below 1 Ω
      15 (EL) - 17 (HF) Dimmer switch in high flash position Below 1 Ω
      Turn Signal Switch
      Tester Connection Condition Specified Condition
      12 (TR) - 15 (EL) Turn signal switch in neutral position 10 kΩ or higher
      11 (TL) - 15 (EL) Turn signal switch in neutral position 10 kΩ or higher
      13 (CR) - 15 (EL) Turn signal switch in neutral position 10 kΩ or higher
      12 (TR) - 15 (EL) Turn signal switch in right turn position Below 1 Ω
      13 (CR) - 15 (EL) Turn signal switch in full right turn position Below 1 Ω
      11 (TL) - 15 (EL) Turn signal switch in left turn position Below 1 Ω
      13 (CR) - 15 (EL) Turn signal switch in full left turn position Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.